Nighthawk Setup

By using the Netgear Night hawk application, a user can monitor or manage the Netgear router right from their bedroom with any hassle after the Nighthawk setup. Once you are done, you can enjoy the seamless network connectivity experience. Be it, streaming the online videos, or playing games, the Nighthawk setup lets users to all without trouble. In this guide, we are going to share the simple guidelines that will let you complete the setup process for the Netgear Nighthawk device.

How to Complete the Netgear Nighthawk Setup?

There are two methods to complete the Netgear Nighthawk Setup – One is set up in Router Mode and the other is set up in WiFi Repeater Mode. 

Netgear Nighthawk Setup in Router Mode- Steps to follow:

  • Check and make sure that you have removed the antenna caps from the router’s antenna ports.

  • Now, you need to turn on the wireless router and let the LED lights to turn to white.

  • Connect the router and modem using the Ethernet cable.

  • Access the routerlogin.net link on your web browser and select the ‘Router Mode’ option.

  • This will direct you to the Netgear Genie Setup Wizard page.

  • Now, you need to follow the onscreen instructions to proceed with the Nighthawk setup process.

  • Once you are done, click on the apply button to complete the setup in Router mode.

Nighthawk Setup

Netgear Nighthawk Setup in WiFi Repeater Mode- Steps to follow:

  • Turn on your router.

  • Open the web browser on your device that is connected to the router network.

  • Visit the routerlogin.net page and type the default username and password to log in.

  • Once you are successfully logged in, you will see the Netgear Genie setup page is appearing on your screen.

  • Click on the ‘Wireless Repeater’ option and type the IP address of your repeater.

  • Follow the on-screen guidelines and to proceed and complete the Setup process.

With the help of the following aforementioned steps, you can complete the Netgear Nighthawk setup on your device. The mentioned guidelines are very simple, but if you still find yourself stuck in the setup process, you can contact the experts and seek their assistance to fix the problem. Or, you can go for the factory reset option. Here are the steps to do so:

  • Find the ‘Reset Factory Settings’ button to reset the router. You can find this button on the backside of the router.

  • Use the pen or paper clip to press and hold the reset button.

  • Wait for a while and release the button.

  • Your router is reset now. The power light will stop blinking and turns to solid green.

Now, you can again follow the Nighthawk setup process to set up the router and use flawless internet services on your device.